luxvision RU-1400, Руководство пользователя

Страница: 16 / 24

in Fig 20), please take off the circuit ring (see No.2 in Fig 19)
3.
About the two DC output on the platform. When the platform rotates outside
20 degrees, the power shut off. When the platform rotates back inside 20 degrees
the power continues. If you pull out the plug on the rnainboard, the DV output
is always standby in spite of platform rotating.
4.
The flow bridge close to the circuit is left direct current. The flow bridge far form
the circuit is right direct current.
5.
The entry of the normal power made the chair works.
Fig.19 Mainboard Chart
1
2
3
5. Operation
1.
Power on the facility, and press the [POWER] button on the Panel (No. 16 in
fig. 1), the facility will stand by.
2.
Press down the handle (No. 17 in fig. 1) on the Operating Board (No. 6 in fig. 1),
you can move the Board to the left or right. When the Board moves to left, the
DC output on left (default is 12V) power on, and the output on right is shut off,
vice versa.
3
. Press the height-adjust buttons ([ ][ ], the two buttons are located on the panel
or on the front plane of the Board (No. 8 in fig. 1)), you can adjust the height of the
chair. You can also use the switch on the back of the chair to do the same operation.
4.
When the examination has been finished, you can move the Board to its origin,
16