QuiCK inStALL guide
PRo-WAv PWK6 As A bRIDGE
Your Access Point allows you to connect many wireless devices to one network connec-
tion. Adding a bridge to your wireless network allows you to extend that one network
connection into an area where you don’t want to, or can’t, run a cabled connection. The
Pro-WAV PWK6 Outdoor Range Extender/Bridge Kit allows even further wireless con-
nections between APs. At Luxul Wireless we recommend using separate APs to create
a wireless bridge, (Figure 6) instead of setting up an AP as a repeater because of the
amount of signal throughput that is lost. Check your APs documentation for instructions
on setting up a wireless bridge.
Even though the Pro-WAV PWK6 Outdoor Range Extender/Bridge Kit is capable of send-
ing signal through most obstacles you will want to be sure that the antennas that make
up your wireless bridge have line of site to each other and are aimed as close as possible
directly at one another.
For more information on deploying a bridge contact [email protected].
FIGURE 6
Ethernet
Coax
Router
AP
Wireless Network
Wireless Bridge
Network Source
