QuiCK inStALL guide
PRo-WAv™ InDooR boARD MounTED RAnGE ExTEnDER KIT
Model NuMber: PWK6-24-FC2
© 2010 by Luxul Wireless Inc. All rights reserved
No part of this publication may be modified or adapted in any way, for any purposes
without permission in writing from Luxul Wireless, Inc. (Luxul). The material in this manual is
subject to change without notice. Luxul reserves the right to make changes to any product
to improve reliability, function, or design. No license is granted, either expressly or by impli-
cation or otherwise under any Luxul Wireless, Inc., intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in Luxul products.
This product is covered by one or more U.S. and foreign patents.
Patents: 7,783,270, 7,379,717, 6,606,075, 6,373,448, other patents pending
ShoCK-WAV™ WI-FI SIGNAl booSter NetGeAr®
MoDEL nuMbER: PW-FC2
MoDEL nuMbER: WG103
FCC ID: W59PWFC2
FCC ID: PY308400097
IC: 8584A-PWFC2
IC: 4054A-08400097
luxul Wireless, Inc.
NetGeAr, Inc.
357 South 670 West, Suite 160
350 East Plumeria Drive
Lindon, UT 84042
San Jose, California 95134-1911
www.luxulwireless.com
www.netgear.com
PRoFEssIonAL InsTALLATIon ConsIDERATIons
The Luxul Wireless Pro-WAV Wi-Fi Range Extender System is required to be professionally
installed. The following components are approved for use in the system.
• Luxul Wireless Shock-WAV PW-FC2 Wi-Fi Signal Booster
• Luxul Wireless X-WAV™ XW-24-FP7 Flat Panel Antenna
• Netgear ProSafe WG103 Access Point
• Netgear Omni antenna included with WG103 access point
The output power of the amplifier is set and tested during manufacturing. There are no user
modifiable parameters in the amplifier. The Luxul Shock-WAV Wi-Fi Signal Booster system
incorporates a Digital AGC (D-AGC) that ensures a consistent and approved output power.
