LUXTEC HEADLIGHT WARRANTY
7
LUXTEC CABLE WARRANTY
REPAIR AND RETURN
Luxtec warrants that the equipment manufactured by
Luxtec shall be free from defects in material and
workmanship under normal use and service for a
period of eighteen (18) months from the date of
shipment from Luxtec. Luxtec’s sole and exclusive
liability under warranty shall be, at Luxtec’s option,
either to repair or replace any component which fails
during the warranty period due to any defect in
workmanship or material F.O.B. factory if:
1. Customer promptly reports such defect to
Luxtec in writing,
2. If requested by Luxtec, customer returns
equipment to Luxtec with shipping charges and,
3. Upon inspection, Luxtec finds the equipment to
be defective.
This warranty is contingent upon normal and proper
use of the equipment. It does not cover equipment
modified without the written approval of Luxtec,
subjected to unusual physical or electrical stress, or
damaged during shipment. This warranty is non-
transferable unless authorized in writing by Luxtec.
Luxtec reserves the right to make design changes on
its products without liability to incorporate said
change in Luxtec products previously designed or
sold.
Upon receipt of the product, it should be carefully
inspected. If any defect is discovered, notification
must immediately given to the manufacturer.
LUXTEC warrants that the cables furnished hereunder
shall be free from defects in material and workmanship
under normal use and service for a period of eighteen (18)
months from the date of shipment from LUXTEC.
LUXTEC’s sole and exclusive liability under this warranty
shall be, at LUXTEC’s option, either to repair or replace
any components of the cable which fails during the
warranty period due to workmanship or material F.O.B.
factory if:
1.
Customer promptly reports such a defect to
LUXTEC in writing,
2.
If requested by LUXTEC, customer returns
equipment to LUXTEC with shipping charges pre-
paid and,
3.
Upon inspection, LUXTEC finds the cable to be
defective.
This warranty is contingent upon normal and proper use of
the cable and does not cover:
•
Fiber Breakage,
•
Soaking of cable lens in sterilizing disinfectant, or
autoclaving,
•
A cable which has been modified without the written
approval of LUXTEC,
•
A cable that has been subjected to unusual physical
stress, or
•
A cable that was damaged during shipment.
This warranty is non-transferable unless authorized in
writing by LUXTEC.
If LUXTEC is unable to remedy any defect in the cable as
required by the foregoing warranties, LUXTEC’s liability
shall in no event exceed the purchase price received
hereunder by LUXTEC for the equipment.
THE WARRANTIES SET FORTH HEREIN ARE IN
LIEU OF ANY OTHER REPRESENTATIONS OR
WARRANTIES. LUXTEC DISCLAIMS AND
CUSTOMER WAIVES ALL OTHER EXPRESS OR
IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO, ALL IMPLIED WARRANTIES OR
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL
LUXTEC BE LIABLE TO ANY PARTY FOR
INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, WHETHER RELATED TO THIS OR ANY
OTHER CLAIM, REGARDLESS OF ANY
KNOWLEDGE OF LUXTEC OF SUCH POTENTIAL
DAMAGES.
Any device must be clean when returned to
LUXTEC. LUXTEC reserves the right to return
unrepaired any equipment that is contaminated with
blood or other organic material.
Warranty Service and Repair:
To obtain service under warranty or return product
for repair, the customer should contact the local
LUXTEC distributor or call LUXTEC Customer
Service at 1-800-325-8966 (USA only) or
+1-508-835-9700.
Copyright 2001 LUXTEC Corporation. All rights reserved. No part of this manual may be copied or reproduced
without written permission of LUXTEC Corporation. Printed in the U.S.A. Violations will be prosecuted.
Information contained in this manual is subject to change without notice.
