25
For maintenance, proper re-assembly and resealing of the venting system is required.
The appliance should be inspected before use and at least annually by a professional
service person.
More frequent cleaning may be required due to excessive lint from carpet bedding material etc. It
is imperative that control compartment, covers of the appliance to be kept clean.
Burner Component Servicing
Burner Removal
•
First step is to remove the door Assembly (refer to page 17). Once the door has been removed
remove any decorative media that may be on the burner trays. The rear baffle panel (#1) is removed after the
seven screws have been removed.(Five on the back panel, two on the top). Both the burner covers (#2) are
then removed once the remaining fasteners.
The Burner tube (#3) is then removed by removing the two fasteners that secure the two feet to the firebox bottom.
The re-assemble simply reverse the process
. Make certain all fasteners have been replaced.
#1
#2
#3
