LE40WTUD
Page - 5 -
Installation Manual
LE40WTUD Shelf Cart Assembly Instructions
Step 1.
Push the four casters firmly into the holes in each
corner of the bottom shelf.
Important
: Casters must be fully seated. Tap firmly with
rubber mallet to properly seat casters.
Step 2.
Insert four (4) long legs into each corner. Using
the rubber mallet, firmly tap each leg until it is
seated securely into position.
Step 3.
Position the center shelf over the long legs and
insert each mounting post into each leg. Using a
rubber mallet, firmly hammer center shelf into
legs until all four legs are seated (flush) against
the surfaces of both shelves.
Step 4.
Push remaining 4 short legs onto leg posts of
center shelf. Tap firmly into place using the rubber
mallet.
Step 5.
Before installing the top shelf, slide the power cord storage arm over the short leg. The power cord storage
arm will allow the user to easily store the power cord while allowing easy extraction when the cord is needed.
NOTE
: The power cord storage arm must be mounted on the same side as the handle (see Electrical Assembly
and Cable-Track™ Management System, page 6)
.
Caster Wheels
Rubber Mallet
Bottom Shelf
Rubber Mallet
Long Legs (Qty 4)
Bottom Shelf
Short Legs (Qty 4)
Rubber Mallet
Rubber Mallet
Center Shelf
Power Cord Storage Arm
Содержание LE40WTUD
Страница 4: ......
