LE40WTUD
Page - 16 -
Installation Manual
TWO PEOPLE WILL BE NEEDED FOR THE FOLLOWING STEPS.
Step 7.
After the assembly has been put together, make sure all the hardware is tight.
Step 8.
Two people should carefully lift the assembly and place the bottom of the support poles into the aluminum block
base.
Step 9.
Once the support poles are seated, tighten the M8 x 10mm socket head set screws using the Allen wrench
(supplied).
Back Cover Plate Installation
Step 1
. Place the back cover plate over the top of the support poles and
let it rest on top.
Step 2.
Insert and tighten two (2) M5 x 10mm Phillips head screws at the
base of the plate.
M5 x 10mm Phillips Head
Screwdriver
Back Cover Plate
Support Poles
Display
Mounting Brackets
Aluminum Block Base
Содержание LE40WTUD
Страница 4: ......
