Luxor LE40WTUD, Руководство по установке

Страница: 15 / 16

LE40WTUD
Page - 15 - Installation Manual
Step 5.
Slide each support pole into the mounting bracket.
Step 6.
Make sure the support poles are even (see
NOTE:
below), and then tighten the M8 x 10 socket head set screw
with the Allen wrench (supplied).
NOTE:
Before tightening the M8 x 10mm socket head screws and placing the display assembly into the aluminum
mounting block, make sure that the measurement from the bottom of the support poles to the bottom of the
display measures 3-1/4”. This measurement will allow for correct and even spacing once the display assembly
is placed into the aluminum block.
Support Pole
Allen Wrench
Bottom of Display
Bottom of Support
Poles
3-1/4”
M8 x 10mm
Socket Head
Set Screw