User Manual of Digital Video Recorder
119
exception message to the host when an alarm is triggered. The remote alarm host must have the
CMS (Client Management System) software installed.
The
Alarm Host IP
refers to the IP address of the remote PC on which the CMS (Client
Management System) software is installed, and the
Alarm Host Port
must be the same as the alarm
monitoring port configured in the software (default port is 7200).
Multicast IP
: The multicast can be configured to realize live view for more than the maximum
number of cameras through network. A multicast address spans the Class-D IP range of 224.0.0.0 to
239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to
239.255.255.255.
When adding a device to the CMS (Client Management System) software, the multicast address
must be the same as the device’s multicast IP.
RTSP Port
: The RTSP (Real Time Streaming Protocol) is a network control protocol designed for
use in entertainment and communications systems to control streaming media servers.
Enter the RTSP port in the text field of
RTSP Port
. The default RTSP port is 554, and you can
change it according to different requirements.
Server Port
and
HTTP Port
: Enter the
Server Port
and
HTTP Port
in the text fields. The default
Server Port is 8000 and the HTTP Port is 80, and you can change them according to different
requirements.
The Server Port should be set to the range of 2000-65535 and it is used for remote client software
access. The HTTP port is used for remote IE access.
4.
Click the
Apply
button to save and exit the interface.
9.2.7
Configuring Email
Purpose:
The system can be configured to send an Email notification to all designated users if an event is detected, e.g. an
alarm or motion event is detected, etc.
Before configuring the Email settings, the DVR must be connected to a local area network (LAN) that maintains
an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification. Additional, the Preferred DNS server
must be configured.
Before you start:
Make sure you have configured the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS
Server in the Network Settings menu. Please refer to
Chapter 9.1 Configuring General Settings
for detailed
information.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the
tab to enter the Email Settings interface.
Содержание TVR series
