LUXMATE LM-CPA, Инструкция по эксплуатации, Страница: 29 / 69

english
Selecting Go
—
The LED indicator illuminates green.
Press the > Come/Go < button (only at LM-CPA and LM-MPA).
– or –
Touch the > Come/Go < button on the display.
=
The display illumination goes out immediately or after a few minutes.
=
The preset scene is called up.
=
The LED indicator illuminates red.
5.3 Calling up scenes
—
You are now on the selection level.
1. To access other buttons in the Scenes bar, touch the arrow symbol in the Scenes bar.
2. Touch a button in the Scenes bar.
=
The scene is called up.
5.4 Setting units or groups temporarily
You have called up the preset scene when coming or any scene that you’d like. You would like
to temporarily set all units in a room or just a single unit.
Navigating to setting level
—
You are now on the selection level.
Touch the > Change Level < button.
=
Setting level appears.
Setting all units or groups temporarily
1 . To access other buttons in the Equipment bar, touch the arrow symbol in the Equipment
bar.
2. Touch the desired arrow symbol above or below the Equipment symbol.
Setting single unit or single group temporarily
1. Touch a unit or group.
2. To access other buttons in the Equipment bar, touch the arrow symbol in the Equipment
bar.
3. Touch the desired arrow symbol above or below the Equipment symbol.
– or –
Touch the button for the maximum or minimum value.
22 Guest