background image

QUICK LIFT L520E

EN

16

The ramps go down slowly without using 

the wired remote control.

Check that the ramps are in the locked position. Never leave the 

ramps loaded without first locking the safety bars.

 

Check that the mechanical control (gold knob) of the solenoid valve 

is activated. It must be in the down position. If it is in high position it 

means that the circuit is open and the oil automatically returns to the 

tank (there is no pressure in the circuit).

When the power is switched on, the ramps 

are neither up nor down.

The fuse of the electrical box has blown. Replace the fuse by a new 

one.

DEACTIVATION

Any equipment that appears damaged in any way, does not operate normally, or has missing parts should be taken out 

of service immediately by removing the power cord from the electrical outlet. Do not use the unit if you notice parts are 

broken, bent or cracked.

START-UP

The QUICK LIFT must be disposed of in accordance with the current environmental and disposal guidelines of the 

country in which it is located.

WARRANTY CONDITIONS

The warranty covers any defect or manufacturing defect for 2 years from the date of purchase (parts and labor). - The 

warranty does not cover incidents due to misuse, fall, disassembly or other damage due to transportation. The warranty 

does not cover normal wear and tear of parts if maintenance is not kept up to date. Only spare parts from the manu

-

facturer may be used to repair the QUICK LIFT.

The characteristics of maximum load appear on the labels sticked on the product. The user must not remove, dirty or 

deface these labels. The warranty will be void if these labels are falsified. Contact the retailer or manufacturer to get 

new ones if needed.

In case of failure, return the unit to your distributor together with:

- The proof of purchase (dated bill, ticket ...)

- An explanatory note of the failure.

- Copy of «Regular Security Checks»

Содержание 3154020062184

























Отзывы: