LUXMAIN 3154020062184, Перевод оригинального уведомления

Страница: 13 / 24

13
QUICK LIFT L520E
EN
Transport handles. Locking bar
The ramps are equipped with directional wheels
moving back and forth and left and right.
Descent:
Before carrying out the lowering manoeuvre, check that there are no persons or obs-
tacles in the safety area. Also check that there are no obstacles in the booms, that
the hydraulic hoses and the remote control cable do not obstruct the booms’ descent.
Position yourself so that you have an overview of the situation and can act quickly in
the event of a problem.
Position yourself outside the security perimeter and press the «UP» button on the wired remote control so as to raise
the ramps by 2-3 cm. Without going under the vehicle, with one hand or foot raise the locking bars so that the 2 cams
rest on the ground.
Press «DN» (down) until the ramps return to the initial position. Please make sure that the cams slide smoothly through
each passage of the locking blocks. Otherwise, pull the vehicle up by pressing «UP» to catch up and until you can put
the release cam back on the ground.
i
The buttons on the remote control always return to their initial position when the ope-
rator does not press them to ensure that all manoeuvres are intended. After operating
the remote control, it is strongly recommended that you place it in a place where unau-
thorized persons or children will not be able to use it.
CONTROLS AND MAINTENANCE
Inspections and maintenance work must be carried out by authorised personnel at the maintenance intervals specified
in this manual. In order to guarantee a long service life and proper use of the QUICK LIFT, the following points must
be observed.