INSTALLATION INSTRUCTIONS
CAUTION:
If your heater is controlled with a mobile application, it should be used in
places with high Wi-Fi signal strength.
8
•
This heater must be installed by a qualified electrician. The suitability of all connections and
electrical wiring must be checked. Attention should be paid to the relevant regulations of power
supply companies and regional construction regulations.
•
Before and during installation, make sure the heater is unplugged.
•
The heater can be mounted horizontally or vertically. When mounted vertically, the digital display
should remain at the bottom.
•
When installing on the wall or ceiling, the heater should be at a minimum height of 1.8
meters
from the floor.
•
When mounting the heater horizontally on the wall or ceiling, do not place it at an angle of more
than 90 degrees or less than 45 degrees.
•
If the installation angle of the heater is vertical or close to vertical, the power cord should
always
be below the heater.
•
During the use of the heater, there is a certain temperature increase in the heater body.
Therefore, never let the power cord touch the heater body. Keep the power cord away from
the
heater.
•
Do not install the heater on the surface of flammable materials.
•
When installing the heater, the distance between the heater and the surface of the
flammable material should always be at a safe level. It should not go below the safe distance.
•
The location of the heater must be at least 0,5 m away from the ceiling and the adjacent
wall.
There must be at least 0,5 m distance between the heater and the wall or any object from both
sides.
•
Check the electrical connections of your heater periodically.
•
In the area where the heater will be installed, make sure there are no cables or water pipes
inside the surface before drilling the surface.
•
The heater must be mounted on the mounting apparatus provided by the manufacturer.
Other mounting apparatus should not be used.
•
Remove all packaging material. Check the heater's power cord and plug for signs of damage.
•
Pay attention to the mounting location and all mounting materials (dowels, screws, etc.).
Make
sure that they are suitable and sturdy enough for the heater to be mounted and permanently
held.
•
Before installation, the minimum safe mounting distances, and inclination angles shown
in the figures (in this booklet) must be strictly followed.
•
Be careful not to add excessive load in the installation of the heater.
•
First, fix the mounting bracket to a safe and solid wall. Make sure that the installation location
and
materials are sturdy and intact.
•
Set the desired angle and tighten all screws securely. Check the connection of the screws
regularly. Mechanical pressure or oscillation due to wind or rain can cause loosening in the screws.
•
Plug in the power cord and run the heater with the remote control. Then check if the
heater is working smoothly in the first 10-15 minutes.
•
If your heater can be controlled with the mobile application, you can control it via Wi-Fi
by watching the installation steps of the mobile application.
WARNING: Fire Hazard
Do not install the heater close to objects such as curtains, wood,
fabric, furniture, flammable materials, etc...
EN
