REMOTE CONTROL AND FUNCTIONS
16
(6)
Timer
This button moves the heater to the timer screen. When it is
entered for the first time, "0H" is written on the screen.
The timer can be set between 0H-1H -...- 9H values with the
"OK" button with the up-down arrow keys. When the timer is
active, a blue light will light on the screen. When you enter the
timer screen again, the remaining time will appear in hours. In
order to make a new adjustment, one of the up-down direction
keys should be pressed, the desired hour value should be
selected, and the "OK" button should be pressed. When the set
time has elapsed, the heater turns itself off and gives a warning
sound. To cancel the timer, you
have to confirm the "0H" option.
(7)
Thermostat
This button moves the heater to the thermostat screen. When
you enter this screen for the first time, the number "24" will
appear. This is a temperature value. Thanks to the up-down arrow
keys, a temperature value between 18-37 ° C can be set with the
"OK" button. It will try to adjust the temperature of the
environment where the heater is located in line with the set
value. When the thermostat is active, a red light will light on the
display. When the thermostat is active, a program setting can
also be made. When your heater reaches the set temperature
value, it turns itself down.
When the temperature falls 2 ° C below the set value, it will
continue to operate at the same program level. When the
thermostat is active, the set value is displayed on the screen when
it is entered. Again, a different value can be set with the up-
down arrow keys. To cancel the active thermostat, it is sufficient to
select the "XX" value before the "18" or after the "37" value.
(8)
Maximum-Minimum Value
These buttons allow reaching the maximum or minimum
value on each screen. When the "MAX" key is pressed, it
reaches the highest value on the screen. When the “MIN"
key is pressed, it reaches the lowest value on the screen.
This function provides extra ease of use.
EN
