EN
ASSEMBLY INSTRUCTIONS
Portable Model Assembly
1
2
Remove the 6 silicone plugs from the mounting kit. Insert
the silicone plugs into the empty holes as shown in the
figure. In this way, the heater will sit more firmly on the
floor.
Remove the 2 screws from the mounting kit and the
aluminum foot tube in the box. Insert the aluminum foot
tube into the foot plate. Then insert the 2 screws into the
holes in the figure. After tightening the screws, make sure
the assembly is secure.
3
4
5
Remove the 2 plastic mounts
from the mounting kit. Prepare to
assemble as shown in the figure.
The striped surface of the plastic
part inserted into the foot pipe
should be mounted towards the
heater body.
Attach the relevant plastic part to the
aluminum pipe. Then thread the
mounting screw on the heater body
through the aluminum tube.
Tighten the screw through the
aluminum tube with a plastic nut.
Then check the stability and security
of the assembly.
DESCRIPTION:
This mounting apparatus has an adjustable feature. The angle
adjustment should be made
properly, and the angle and screw should be checked
at certain times. While mounting, the digital display
and cable should be mounted so that they stay at the bottom.
1
1
