19 |
P a g e
EXTENSION BRACKETS
Extension brackets can project the installation bracket up to
70mm from the mounting surface. Position the brackets on
the centrelines you marked and use two screws to attach
them. Be sure to align the tops of the brackets on the same
level. Connect the installation brackets with the machine
screws and nuts included with the extension brackets. Use
the same holes on all the extension brackets so that each
installation bracket projects the same distance from the
mounting surface. Indentations are stamped into the
extension brackets between each hole. If desired, the
unneeded length of a bracket may be cut off. This should be done before mounting
the bracket.
INSTALL THE WINDOW SHADING
With the front of the headrail facing you, push the top edge of the headrail into
the installation brackets, as shown. The headrail should click into position at each
bracket location.
When necessary to remove the window shading, insert a flat blade screwdriver
into the slot behind the locking tab on the installation bracket. Push up and twist
the screwdriver. This will move the rail just far enough forward to disengage the
locking tab. Note: The shading may need to be partially lowered to allow the
screwdriver to fit between the headrail and fabric roll.
END MOUNT APPLICATIONS
Two extension brackets can be used to end mount the headrail where
conventional inside or outside mounting techniques will not work.
Содержание Silhouette Shades
Страница 1: ...Silhouette Shades Product Manual...
Страница 3: ...3 P a g e PRODUCT VIEW...
Страница 6: ...6 P a g e LIMITATIONS Limitations...
Страница 11: ...11 P a g e HEADRAIL SIDE ELEVATION...