Lux Tools 380512, Руководство пользователя

Страница: 21 / 100

GB
21
Risks caused by vibrations
The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from these
as a result of the following factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
– Maintain the device in accordance with the
instructions in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your
hands, in particular, are kept warm.
– Take regular breaks and move your hands at the
same time to promote circulation.
Your device at a glance
►
P. 3, item 1
1. Tool receiving socket
2. Holder for the depth stop
3. Rotation direction switch
4. Locking button
5. On/Off switch
6. Lock button for depth stop
7. Lock button for mode changing switch
8. Mode changing switch
9. Additional handle
Scope of delivery
• Hammer drill
•
Additional handle
• Depth stop
• Drill (3×)
• Chasing bit (2×)
• Operating instructions
Assembly
Mounting the depth stop
– Press locking switch (6) and keep it pressed.
– Insert the depth stop into the holder (2).
– Set the depth stop to the required depth.
– Release locking switch (6) again.
Operation
Removing a tool
►
P. 3, item 2
– Pull the tool holder (1) back.
– Remove the tool.
Inserting a tool
►
P. 3, item 2
– Pull the tool holder (1) back.
– Insert the required tool with a slight turn until the
tool holder locks.
Selecting the operating mode
►
P. 3, item 3
Press the lock button (7) and set the switch (8) to the
required operating mode:
• Position [ ] for drilling without the hammer
function into wood, metal, ceramics and plastics
and for the screwdriver function.
• Position [ ] for hammer drilling in cement or
stone.
• Position [ ] for chasing in cement or stone.
Changing the rotation direction
– To drill and screw screws into place, press the
rotation direction switch (3) to the left (rotation in
clockwise direction).
– To remove screws, press the rotation direction
switch to the right (rotation in an anti-clockwise
direction).
Check before switching on!
Check to make sure the unit is in a safe operating
condition:
– Check to make sure there are no visible defects.
CAUTION! Risk of injury due to vibra-
tions!
Vibrations may, in particular for per-
sons with circulation problems, cause dam-
age to blood vessels and/or nerves.
If you notice any of the following symptoms,
stop working immediately and consult a doc-
tor. Numbness of body parts, loss of sense
of feeling, itching, pins and needles, pain,
changes in skin colour.
CAUTION! Risk of injury Shortly after
being used, the tool may be very hot. Risk of
burning! Allow a hot tool to cool down. Never
clean a hot tool with flammable liquids.
WARNING! Risk of injury! Make sure that
when installing the tool that it fits securely in
the clamping chuck and is not at an angle.
Note: Clean and grease the shaft of the tool
before inserting.
NOTICE! Risk of damage to the unit!
Only change operating mode when the
device is switched off.
NOTICE! Risk of damage to the unit!
Do
not use settings [ ] , [ ] and [ ] for
screwing in and removing screws. Do not
use settings
[ ] and [ ] for chasing.
Note: The position [ ] is only used to
rotate the tool to the required position. To
chase, the switch (8) must be set to posi-
tion
[ ] .
NOTICE! Risk of damage to the unit!
Only use the rotation direction switch when
the device is at a standstill.