5-4 Clear the existing saving data from the memory
1)Use the " Set Button " to select the main function to
" CLr " ( CLEAR ), at the same time the upper display
will show the Data Logger counts no. that already
save into the memory.
2)Press the " Function Button " ( 3-5, Fig. 1 ) once, the
upper display will show " 0 ", if intend to clear the
existing saving data from the memory, just press the "
Enter Button " ( 3-4, Fig. 1 ) to confirm, then the
existing data will clear from the memory IC.
Remark :
Before Press the " Function Button " ( 3-5, Fig. 1 )
to confirm, it can press the " Esc Button " ( 3-3, Fig.
1 ) to exist the clear function and the data will be
not cleared.
5-5 Auto power ON/OFF
Use the " Set Button " to select the main function to
" OFF ", then one by one to press the " Function Button "
( 3-5, Fig. 1 ) a while will determine the default the
power management system is Auto Power Off enable or
disable.
@Press the " Function Button " once, if the upper display
value show " 0 ", it is not Auto Power Off management
( disable ).
@Press the " Function Button " once, if the upper display
value show " 1 ", it is the Auto Power Off management
( enable ).
13
