Memory full
If Press the " Logger Button " ( 3-6, Fig. 1 ) once,
both the mark " A ", upper display and lower display
are flashed, it indicate the memory data already over
1000 no. and the memory is full.
c) During the Data Logger function is executed, press the "
Logger Button " ( 3-6, Fig. 1 ) once will stop to execute
the data logger function, the mark " A " will disappeared.
If press the " Logger Button " ( 3-6, Fig. 1 ) once again
will continuous the Data Logger function.
Remark :
1)If intend to change the data logger sampling time,
please refer section 5-2, page 11.
2)If intend to know the space of balance data numbers
into the memory IC, please refer section 5-3, page 12.
3)If intend to clear the saving data from the memory
please refer section 5-4, page 13.
5. ADVANCED MEASURING
PROCEDURE
When execute the following Advanced
Measuring Procedure should cancel the " Hold
function " and the " Record function " first. The
display will not show the " HOLD " and the " REC "
marker.
9
