@Press the " Function Button ", if the upper display value
show " 10 ", the default Data Logger sampling time is
10 seconds.
@Press the " Function Button ", if the upper display value
show " 30 ", the default Data Logger sampling time is
30 seconds.
@Press the " Function Button ", if the upper display value
show " 60 ", the default Data Logger sampling time is
60 seconds.
@Press the " Function Button ", if the upper display value
show " 600 ", the default Data Logger sampling time is
600 seconds ( 10 minutes ).
@Press the " Function Button ", if the upper display value
show " 1800 ", the default Data Logger sampling time is
1800 seconds ( 30 minutes ).
@Press the " Function Button ", if the upper display value
show " 3600 ", the default Data Logger sampling time is
3600 seconds ( 1 hour ).
After the function is determined, press the " Enter Button "
( 3-4, Fig. 1 ) to confirm save the selection data into
memory IC permanently. Press the " Esc Button " ( 3-3.
Fig. 1 ) will revert to normal display screen.
5-3 To show the balance data numbers in the
memory
Use the " Set Button " to select the main function to
" Cnt " ( count ), then the upper display will show the
balance data numbers that exist into the memory ( allow
memorize data no. ). Press the " Esc Button " ( 3-3. Fig.
1 ) will revert to normal display screen.
12
