a. Hold the " Set Button " ( 3-6, Fig. 1 ) at least two
seconds until the lower display show " COde ", then
release the " Set Button ", the upper display will show
" 1000 ".
* 1000 is the password code that allow to execute the
Advanced Measuring Procedure following.
After display show " COde 1000 ", push the " Enter
Button " ( 3-4, Fig. 1 ) once will go to the following b.
procedures.
* If push the " ESC Button " ( 3-3, Fig. 1 ) will escape
the selecting function and return to the normal
measuring display.
b. One by one to press the " Enter Button " ( 3-4, Fig. 1 )
once a while to select the five main function that show
on the lower display as :
.......
℉
Change the Temp , unit
℃ ℉
SEC...... Change the data logger sampling time
Cnt........To show the balance data numbers in the memory
CLr........Clear the existing saving data from the memory
OFF.......Auto power ON/OFF management
10
