RESET232
RESET232
Reset RS-232 port settings
Syntax
RESET232
Processor responds with one of the following
For the new RS-232 port parameters to take effect for this port, you
must cycle the processor power.
Description
This command is used to reset all RS-232 port settings to the serial driver settings assigned to
that port using the HomeWorks Interactive software. The settings effected are baud rate,
handshaking type, number of data bits, parity type, number of stop bits, and the status of
HomeWorks monitoring messages.
All ports will immediately switch to the driver settings except the port connected to.
Example
Reset all RS-232 ports settings for all processors.
L232> RESET232
For the new RS-232 port parameters to take effect for this port, you
must cycle the processor power.
http://www.lutron.com/hwi/Help/l232/reset232.htm [7/3/03 1:20:15 PM]