SETLED
SETLED
Set an LED State
Syntax
SETLED, <address>, <led number>, <led state>
Parameter Description
Format
address
system address of the keypad [processor : link : address]
led
number
led number on the keypad
1 - 24
The led number is the corresponding button
number
led state
state to set the LED to
0 = Off
1 = On
2 = Flash 1
3 = Flash 2
Description
Sets the state of a keypad led. If the designated led is already programmed to indicate the
status of something else in the system, this command will have no effect on the led state.
Example
Turn on LED 3 on processor 2, link 5, keypad address 7
L232> SETLED, [2:5:7], 3, 1
See Also
RKLS - Request keypad led states
http://www.lutron.com/hwi/Help/l232/setled.htm [7/3/03 1:20:02 PM]