Page
28
of
60
Diagram 2.6.1-4
NOTE: The user can change the orientation of the
power box based on comfort preferences and
surrounding equipment.
Use the screws provided to join the semi circles and
attach the power box to the vertical tube. *
Use caution
while tightening these screws and be sure to
evenly
secure
them to prevent damage to the rings.
2.6.2 Swing Arm Stand Assembly Troubleshooting
No.
Problem
Solution
1.
The main cable is
not threaded into
the swing arm
assembly.
Using your fingers, gently pinch the black cable enclosures
located on the swing arm portion of the swing arm assembly
and pull downward. Make sure to pinch where the yellow
arrow indicates.
Diagram 2.6.2-1
Once off, lay the cable within the enclosure.
Diagram 2.6.2-2
Place the cable enclosures back into the swing arm by lining
the arrows up to the holes on the swing arm and pushing
inward.
NOTE: At each corner, please leave an extra length of cable to
ensure smooth movement of the swing arm.
Diagram 2.6.2-3
2.
The power box is
not attached to
the vertical tube.
There should be 2 power box assembly rings and 4 screws.
Each ring is a semi-circle.
