Page
22
of
60
Diagram 2.5-4
5.
Take the main cable connector coming out from the bottom cable enclosure and connect it to the bottom of
the power box.
Diagram 2.5-5
NOTE: There is a bump on top of the red dot on the main cable connector. This bump will fit into the notch
located on the power box connector. Make sure to match the bump to the notch. The cable will plug in
easily. Do not force it in.
Diagram 2.5-6
6.
The Camera Base Plate should already be attached to the bottom of the colposcope. If that is the case, skip
to step 9. If not, detach the camera base plate from the camera base mount by turning the knob located at
the top of the Camera Base Mount counterclockwise.
