21
Mounting
ENG
3.3 Mounting the luminaire of
mounting type “Adjustable
holder”
In combination with the adjustable holder,
the luminaire is ball-impact-resistant
according to DIN 18032-3.
Fig. 4: Hole pattern.
X
Mount the holder to the wall or ceiling
using suitable screws, see Fig. 4.
C
A
B
Fig. 5: Mounting the adapter plate
X
Screw the adapter plate
B
to the inside
of the holder using hexagon screw
C
and hexagon nut
A
, see Fig. 5.
X
Mount the second adapter plate to the
other inside of the holder.
Fig. 6: Hanging the luminaire into the holder
X
Hang the luminaire into the holder, see
Fig. 6.
1.
2.
D
E
Fig. 7: Hanging the retaining plate into the
luminaire
X
Hang the retaining plate
E
into the lu-
minaire, see Fig. 7.
X
Screw the screw
D
into the adapter
plate.
X
Hang the second retaining plate into the
luminaire on the other side.
X
Screw the second screw into the sec-
ond adapter plate and tighten both
screws
D
to a torque of
15 – 20 Nm
.
90°
+
-
Fig. 8: Aligning the luminaire
X
Align the luminaire, see Fig. 8.
C
Fig. 9: Tightening the hexagon screws
X
Tighten the hexagon screws
C
to a torque
of
50 Nm
on both sides of the luminaire,
see Fig. 9.
S-MA IL Up_00_405424811.indb 21
13.06.2017 07:41:00
