22
Connection
ENG
4. Connection
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X
Connection by a skilled electrician
only.
X
Compare the mains voltage with
the nominal voltage and the fre-
quency specified on the rating
plate and make sure that they are
identical.
4.1 Connecting the luminaire
without plug-in connector
Colour of the
wire
Assignment
brown
L1
black
DALI / +
grey
DALI / -
blue
N
yellow/green
PE
Tab. 2: Terminal assignment with “DALI CLO”,
“DALI” or “1-10 V” activation.
Colour of the
wire
Assignment
brown
L1
blue
N
yellow/green
PE
Tab. 3: Terminal assignment with “On/Off” acti-
vation.
NOTE:
Observe the terminal assignment,
see Tab. 2 and see Tab. 3.
X
Connect the wires to a suitable power
supply.
4.2 Connecting the luminaire
with plug-in connector
Designation
Specification
Cable type
Flexible cable
Number of wires
3 / 5
Cable cross-sec-
tion (per wire)
0.75 - 4 mm²
Diameter of
sheathed cable
10 - 14 mm
Sheath stripping
length
PE: 30 mm
N, L, Dali: 25 mm
Wire stripping
length
8 mm
Tab. 4: Required cable.
X
Determine the socket assignment
according to the following table.
B
D
E
C
A
No. Assignment
A
PE
B
L
C
DALI / -
D
DALI / +
E
N
Tab. 5: Socket, view from behind.
X
Connect the cable to the socket.
X
Connect the socket to the plug on the
luminaire.
S-MA IL Up_00_405424811.indb 22
13.06.2017 07:41:00