When you are loading gear, have someone on the dock pass gear aboard instead of
stepping into and out of the boat. Secure all gear firmly so it doesn’t shift or inter-
fere with boat operation. When boarding, passengers should step into the boat one
at a time, not jump. Passengers not helping load gear should be seated during load-
ing to maintain an even trim. Position passengers and gear so that the load is bal-
anced (Figure 8-2). Do not use swivel seats above trolling speed. Secure unoccu-
pied seats. Observe warnings on seat pedestals.
STARTING PROCEDURES
Note
: the engine manual included with your Owner’s Packet has detailed starting
instructions. the following information is merely a guide and does not explain all
starting procedures in detail.
Note
: run blower motor on inboard/outboard models for at least 5 minutes to clear
fumes from bilge before starting.
Preliminary Checks
1. If the boat is not secured to the dock, do so before starting the engine. Keep it
secure until the engine is running and warmed up.
8.5
FIGURE 8-2 LOADING PASSENGERS
G
E
T
T
IN
G
U
N
D
E
R
W
A
Y
Lund-08.indd 5
7/9/10 1:53 PM
https://www.boat-manuals.com/
