ODiSI 6
ODiSI 6
User’s Guide
Page 17
2.
For the ODiSI 6100 Series, measurements can be taken with the 1.3 mm Gage
Pitch. To change the gage pitch, select the
“Settings → General” menu item to open
the “General Settings” dialog and then choose “1.3 mm” from the Gage Pitch drop-
down.
For the ODiSI 6000 Series, choose “5.2 mm” from the Gage Pitch drop-down.
Figure 5-4: General Settings menu item
Figure 5-5: General Settings dialog
3.
Click on the
“View”
button.
Figure 5-6: Added identified sensor to test configuration on channel 1, View button enabled
4.
Click the
“Fit Plot”
button to auto-scale the measurement vs. length plot.
