www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | [email protected]
www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | [email protected]
2
The position of the lights around the vessel can also be
setup. This ensures that sweep mode works in the
correct order.
Above water zones do not require position information
but can be set if desired.
Light Discovery Process…
Upon first installation and before choosing single vs multi zone, the lights connected to the Lumi-Link network need
to be discovered.
NOTE: Default Password = “0000”
Perform these steps on first use or if new lights have been added or deleted from the Lumi-Link network.
Select Setup icon
Select “Preferences”
Enter default password = 0000
Select “Light Setup”
Select “Light Discovery”
Check that all lights have been found
Note – if the number of lights found does not match the expected number, check connections and that each light
has power.
