manualshive.com logo in svg

lumishore 60-0366, Руководство по установке и эксплуатации, Страница: 10 / 13

Поделиться
Скачать
lumishore 60-0366 Скачать руководство пользователя страница 10

www.Lumishore.com

Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK  |  +44(0)208 144 1694  |  [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234  |  (941) 405-3302  |  [email protected]

10

Control from Smart Device or Web Browser…

Ensure  your  smart  device  is  connected  to  the  same  network  as  the  Lumi-Link  Command  Centre.  Depending  on 

installation this may be the vessels on-board Wi-Fi, the MFD Wi-Fi or the Lumishore Lumi-Link Display Wi-Fi. The 

following example shows the Lumi-Link Command Center connected to the MFD Wi-Fi. 

Ensure the MFD Wi-Fi is switched on and the smart device or laptop is connected to it.

Using the MFD – launch the Lumi-Link app

Note - from time to time the MFD or network router may change the IP address automatically. If the Lumi-Link app 

does not display, ensure you are connected to the correct Wi-Fi network and that you have entered the correct IP 

address.

www.Lumishore.com

Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK  |  +44(0)208 144 1694  |  [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234  |  (941) 405-3302  |  [email protected]

Make a note of the IP address 

Note: it may be different to the 

example below.

Type the IP address into the browser

on the smart device or laptop.

You can now control the lights

remotely using the Lumi-Link app.

Select “Setup” icon 

Select “About”

Содержание 60-0366














Отзывы:

Нет отзывов