Luminor BLACKCOMB, Руководство пользователя

Страница: 8 / 16

6 | P a g e
Step 2) Thecontrollerwillonlynotifyyouwhenthereisafailure
modewherebythesolenoidmodule(andconnectedsolenoidvalve)
willbeactivated.OntheBLACKCOMB5.1system,thesolenoid
modulewillbeactivated(shuttingofftheflowofwater)uponLAMP
FAILURE(seeFig.7).Toremedythis,replacetheUVlampandrestart
thesystemasperthedirectionsoutlinedintheOwner’sManual.
Step 3) OntheBLACKCOMB6.1systemwhereaUVsensorisinstalled,
thesolenoidmodulewillbeactivated(shuttingofftheflowofwater)
uponaLOWUVcondition(lessthan50%)(seeFig.8).Toremedythis,
youwillneedtoaddressthereasonforthislowUVconditionwhich
maybeduetoadirtyUVsensorandquartzsleeve,alampthatis
not emitting enough UV energy, or a change in the water quality.
PleaserefertotheUVsystemsOwner’sManualforcorrectiveaction
procedures.
Figure 7
LAMPFAILUREScreen
Step 4) To determine what position the solenoid valve is currently in, the solenoid module
incorporatesthreelightsonthecircuitboard(seeFig.9).WhenthesolenoidisintheOPEN
positionagreenlightwillappearonthecircuitboardbesidetheword“OPEN”.Whenthevalve
isCLOSED,aredlightwillappearonthecircuitboardbesidetheword“CLOSED”.Andwhenthe
solenoidisinanOVERRIDEposition,anamberlightwillappearonthecircuitboardbesidethe
word“OVERRIDEON”.
Figure 8
LOWUV
Screens
Figure 9
Solenoid Status
(Colour)
Boil Water Advisory: If any failure occurs on a BLACKCOMB UV system, the water
must not be used for human consumption until the system is returned to a safe operational
mode. If the water is used for human consumption during this period, the water must be
boiled (minimum 20 minutes at a full boil) prior to consumption.
EMERGENCY BYPASS
Inacasewherethesolenoidvalvehasbeenactivated(valveisclosedandnowaterisallowed
toflow),thesolenoidmodulehastheabilitytobypassthesolenoidvalveincaseofan
emergencyneedofwater.Toinitiatethisbypass,depressthebuttonlabeled“OVERRIDE”
locatedinthelowerleftportionofthecircuitboard(seeFig.10)