2 0 |
P a g e
Expansion Modules
BLACKCOMB
5.1
and BLACKCOMB
6.1
controllers incorporate an
“Infinite Expandability Port” (IEP) which allows for expansion
to the UV sensor and all other modules. Each module (including
the sensor) comes with both a male and female connection.
Connect any device to the controller and all subsequent
devices are then connected into the female end of last device added in a “daisy chain” configuration.
The following optional expansion modules are available for use on BLACKCOMB UV
controllers.
Contact your authorized distributor for purchasing information.
REMOTE ALARM CONNECTION MODULE: Allows for a
connection to a remote device such as a buzzer, light, alarm
system, PLC, etc., via a pair of contacts. In normal operation
the OK and COM contacts will be connected, and in a fault
condition (Low UV, Lamp fail, Power Fail), the Fault and COM
contacts will be connected. Maximum contact rating is 30V /
1A (use 16-22 AWG). Order PN MOD-RAM.
SOLENOID CONNECTION MODULE: Connects a NORMALLY
CLOSED line voltage solenoid valve to the controller. Maximum
contact rating is 240VAC (50-60Hz) / 30VDC / 2A. On a non-
monitored system, the solenoid will only close on a lamp failure
error. On a monitored system, the solenoid is closed when
the UV level drops below 50%. Also note that in cases where
emergency use of untreated water is required, the controller
can be placed into a manual override mode allowing for the
flow of water in an alarm condition. Order PN MOD-SOL.
4-20 mA MODULE: Outputs a 4-20mA signal of the UV output
to a remote device such as a data logger or computer. Order
PN MOD-420.
The WiFi module and accompanying IoT application allows
you to connect your UV system to a smart phone, tablet,
computer or other connected platform. View system
status, receive SMS or email messages of alarm conditions
and monitor the health of your UV from anywhere via this
connected platform. Connect the device via the APP found on
Google Play or the APP Store and connect your UV device to
your router, then download the software for your connected
device and have peace of mind that your UV system is
providing safe, reliable disinfection.
The Ultrasonic Flow Meter enables your UV system to dim
power in times of low to no flow, saving you money on en-
ergy, reducing water temperature, and decreasing the risk of
fouling.
