18
U.L. Model No.: CF205L-1
6. Final Assembly
(Continued)
THREADED STUDS (2)
HANGER BRACKET
Figure 29
6.4
Screw the 1-1/4” Threaded Studs into the Threaded Holes
on the bottom of the Hanger Bracket with your fingers
(Figure 29).
6.3
Place the Glass into the opening of the Lower Housing,
aligning the three Flat Areas on the top edge of the Glass
with the three raised Dimples on the Lower Housing and
turn the Glass clockwise until it stops (Figure 28).
NOTE: Periodically check that the Glass is seated
fully clockwise in the Lower Housing.
GLASS
LOWER
HOUSING
DIMPLES (3)
FLAT
AREA
Figure 28
