18
ETL Model No.: CF835
12. Installing the Light Fitter Assembly and Shade
(Cont’d.)
SWITCH HOUSING
SWITCH HOUSING
BLUE WIRE
LIGHT FITTER
BLACK WIRE
LIGHT FITTER
ASSEMBLY
WIRE
CONNECTOR
Figure 27
12.3
Connect the Ceiling Fan Blue Wire to the Light
Fitter Black Wire . Use one of the Wire Connectors
(previously removed) to make the connection
(Figure 27) .
LIGHT FITTER
ASSEMBLY
#8-32 x 8 mm
FLAT HEAD
SCREWS (3)
SWITCH HOUSING
SWITCH
HOUSING COVER
SWITCH
HOUSING
PULL CHAIN
CURVED SLOT
REVERSE SWITCH
LONG SLOT
SWITCH HOUSING
COVER
Figure 28
12.4
Remove and Retain the Three #8-32 x 8 mm Flat Head
Screws from the Switch Housing (Figure 28) .
Carefully tuck all Wires and Splices into the Switch
Housing .
NOTE: The Switch Housing Cover has a Long
Slot that Has To Line Up with the Reverse Switch
and a Curved Slot that Has To Line Up with the
Pull Chain, both located inside the Switch Housing.
Align the Three Switch Housing Cover Screw Holes
with the Three Switch Housing Screw Holes .
Reinstall and Tighten the Three Switch Housing
Screws, previously removed, to secure the Light Fitter
Assembly to the Switch Housing (Figure 28) .
A spare #8-32 x 8 mm Flat Head Screw is in the
hardware bag, if needed .
To avoid fire or electrical shock, be careful not to
pinch wires between the switch housing and the
switch housing cover.
WARNING
!
