Lumex HYBRID LX LX1000 Rollator, Руководство пользователя

Страница: 6 / 11

LX1000-INS-LAB-RevB12 6
reAr WHeeLs
rear Wheel Installation
The rear wheels, which fold down for use, are
connected to the rollator frame by the brake cable. To
install the rear wheels:
1. Remove plastic wrapping from wheel.
2. Fold back the wheel with the folding mechanism so
that it is fully extended.
3. Lock the wheel in extended position: Insert screw
into tubing from inside of frame. Install washer on
end of screw outside frame.
4. Install screw knob on end of screw and tighten
by turning knob clockwise. Repeat for other side.
Correct installation is shown in picture at right.
seAt
1. Once the wheels have been securely installed, turn
the rollator to upright position.
2. Push down on both the left and right side of the seat
to securely lock the seat support bars into place.
Info: You will hear a click when the seat locks into
position.
WArnInG: Avoid putting your ingers under the
seat support bars when locking the seat into
position.
Handle Height Adjustment
1. The HybridLX ™ handle height can be adjusted very
easily. To adjust the handle height, press the push button
on the side of the rollator and adjust to the best height
for the user. Ensure that the push button locks in one of
the adjustment holes to secure its position.
2. Repeat for other side.
Info: A recommended guideline for proper handle height
positioning is to position the handle at wrist height of
the user. Your healthcare professional, distributor or
caregiver should assist you in finding the best handle
height for you.
storAGe BAG
The storage bag is already installed onto the seat support
bars. The storage bag can be conveniently removed to place items and then reattached, no tools
needed.
Locking seat Into Place
seat support
bar
seat
Handle/Height
Adjustment
push button
handle
height
adjustment
holes
storage
bag
rear Wheel Installation
screw knob
screw
folding mechanism
(hinge joint)
rear
wheel