LX1000-INS-LAB-RevB12
7
footrests
WArnInG: do not stand on the footplates; this could cause the HybridLX
™
to tip.
footrest Installation
footrests Installed
swingaway release lever
heel loop
footplate
extension holes
locking button
hinge pins
hinge plates
Installation
1. Attach the footrest to the rollator frame by mounting the footrest hinge plates on the rollator
hinge pins, as shown above.
2. Push the footrest towards the front of the rollator to lock it into position.
3. Ensure that the footrest is locked in place before use. Repeat for other side.
Length Adjustment
1. Press down on the locking button and adjust footplate to the desired length.
2. Repeat for other side. Ensure that the locking buttons are secure in the extension holes to
properly lock into position.
removal
1. Pull on the swingaway release lever to release footrest. Footrest will swing outward.
2. Lift footrest straight up off rollator hinge pins.
storage
Footrests can be conveniently stored in the storage bag when not
in use. When not in use, footrests can also remain attached to the
rollator by simply attaching the lower hinge plates to both lower
hinge pins as shown at right. This will keep the footrest in place and
allow the user to move freely.
WArnInG: ensure that footrests are locked in place before
use.
footrest
not-in-Use Attachment
hinge pins
hinge plate
installation holes
