LUMENIS Novus Spectra, Руководство оператора

Страница: 37 / 110

Preoperative Instructions 37
Novus Spectra
0642-543-01, Rev A, 12/02
Preoperative Instructions
1
Verify that the laser is properly connected, as instructed in “Connection
Instructions” in this manual.
2
Verify that the delivery system is properly connected as instructed in the deliv-
ery system operator manual. If using an external door interlock, verify that it
is also properly connected.
3
Post the “Laser in Use” warning sign outside the treatment room door.
4
Plug the laser main power into the wall socket.
5
Ensure that all persons in the treatment room are wearing the appropriate laser
safety eyewear. See “Laser Safety Eyewear” in this manual for detailed laser
safety eyewear information.
6
Turn on the laser, as instructed in “Laser Console Display and Remote Con-
trol Basics” in this chapter.
7
Perform the aiming beam integrity check, as instructed in “Laser beam integ-
rity check” in this chapter.
WARNING - Lasers generate a highly concentrated beam of light that may
cause injury if improperly used. To protect the patient and the operating
personnel, the entire laser and the appropriate delivery system operator
manuals, including all Safety and Regulatory sections, should be carefully read
and comprehended before operation.
WARNING - Do not use the delivery system if the aiming beam is set to high
intensity and is weak or not visible; the fiber optic cable may be damaged. A
damaged fiber optic cable may cause accidental laser exposure or injury to the
treatment room personnel or patient, and/or fire in the treatment room.
CAUTION - Before using the laser, always verify that the displays on both the
laser console and the remote control are properly working and are consistent
with each other.