IS 12-TSP / IGA 12-TSP Manual
Settings / parameter descriptions
•
22
4.2.1
Functions and setting of parameters
Temperature or
parameter display:
In the measuring mode the display shows the actual temperature
reading. After pushing the parameter key the display indicates the
actual value of one selected parameter.
Special indications:
8888 = measurement exceeds the end of sub
range
Targeting light
on / off:
Pushing the PL key in measuring mode the laser targeting light is
switched on.
The IS 12 measures continuously also with switched on targeting light
and the display shows the actual temperature reading. The laser
targeting light is switched off automatically after approx. 2 min or after
a further push of the PL key.
Setting keys: 1)
PAR:
2)
:
3) ENT:
With the
PAR
button all available parameters are displayed in the
following description. Pushing the button again changes the display to
the next parameter, after the last parameter it changes to the actual
temperature reading.
With the arrow keys
and
all parameter settings can be displayed.
Pushing the button longer changes the settings in fast mode (the keys
and
ENT
are blocked if the keyboard is locked via the interface
commands or/and during a measurement in combination with a PC and
InfraWin).
If a parameter is changed with the arrow keys the new value must be
confirmed by pushing the ENT key. If it is not confirmed with ENT the
instrument is still operating with the previous parameter value. If no
key is pressed for approx. 30 s the display changes to the temperature
indication.
Limit contacts:
Two limit switches can be set. If the measuring temperature exceeds the
adjusted limit contact temperature, the LED S1 or S2 displays the switch
status.
Scale °C or °F:
The LED indicates the temperature scale in °C or °F.
Parameter
indicator:
LED’s indicate which pyrometer parameter is selected for reading or
changing.
4.3
Temperature display (°C / °F)
The temperature can be displayed in °C or °F.
Settings:
°C
°F
