Section 5 – Configuration
RadianceXD
Rev 1.0
25
Flip Input Field
Some source devices do not follow conventions for the order of video fields. This can be seen as excessive
combing in the video. While generally not required, this command allows the input fields to be swapped so that the
images can be properly deinterlaced. The command format is:
MENU
→
Input
→
Video Setup
→
[Resolution]
→
Control
→
Deint
→
Field
→
Field flip
(
On, Off
)
→
OK
System Settings
OSD Active
This command controls whether the OSD Menu is displayed on the video output. The command format is:
MENU
→
Other
→
OSD Setup
→
OK
Menu Mode
This command is used to lock the menu, display normal menu or display all menu items. The command format is:
MENU
→
Other
→
Menu mode
→
(Locked, User mode, Service mode)
→
OK
OnOff Action
This command controls the power On/Off behavior. The command format is:
MENU
→
Other
→
OnOff Setup
→
Auto On
→
(Standby, Turn On)
→
OK
RS232 settings
This command allows you to set the RS232 parameters. The command format is:
MENU
→
Other
→
OnOff Setup
→
RS232
→
(Poweron, Poweroff, Baudrate, Parity, Gap)
→
OK
Test Pattern
This command is used to display the internal test patterns. The command format is:
MENU
→
Other
→
Test Pattern
→
(Reference, Adjustable, Warm up)
→
OK
Trigger Out
This command controls the two trigger outputs on the rear panel. By default Trigger 1 is on for power and Trigger
2 is on for 2.35 aspect. The command format is:
MENU
→
Other
→
Trigger Out
→
(Trigger1, Trigger2)
→
OK
Zoom Step
This command controls the size of the Zoom step. The command format is:
MENU
→
Other
→
Zoom step
→
OK
