Section 4 - Audio
RadianceXD
Rev 1.0
15
Audio Example 3
Output 1 drives a 1080p60 HDMI projector without audio capability, and output 2 drives an HDMI amp. In
addition, the amp’s HDMI output drives a 720p (max) LCD TV. When watching the projector (1080p60),
Output 2 should have audio only since the TV cannot accept 1080p60. When you watch TV you would
select 720p video output, and turn on the video output on HDMI Output 2. One option is to set MEMA to
output 1080p (and disable output 2 video), and MEMB to output 720p on both outputs. Audio can be set as:
Audio Source Selection Defaults
The video inputs are linked to the following audio sources by default.
Input Number
Video Input Type
Audio source
1
HDMI
HDMI1
2
HDMI
HDMI2
3
HDMI
HDMI3
4
HDMI
HDMI4
5
HDMI
HDMI5
6
HDMI
HDMI6
7
Component
TOS1
8
Component
COAX1
9
Component
COAX2
10
Component
COAX3
11
S-Video
TOS2
12
S-Video
COAX4
13
S-Video
COAX5
14
S-Video
COAX6
15
Composite
STEREO1
16
Composite
STEREO2
17
Composite
STEREO3
18
Composite
STEREO4
To change the audio source for a particular input, first select that video input, and then select the
desired audio source. More than one video input can be linked to the same audio source.
The
command is:
MENU
→
Input
→
Audio Setup
→
Source
→
(select audio input)
→
OK
