12
510 Series Analog PTZ Camera
Dome Settings > Sys Info Settings
Dome Settings > Sys Info Settings
Soft Address
Choose a channel ranging from 1–31.
Soft Addr Act
When this is on, you may choose the camera channel using the
OSD rather than using the DIP switches.
This is a great time
saver,
as you no longer have to open the camera to set its address.
When this is off, you must set the camera’s address with the DIP
switches. See the appendices for details on setting the DIP switches
manually.
After you enable or disable the soft address, the camera
automatically reboots.
Soft Baud
Use the OSD to select baud from 2400–19200.
Soft Baud Act
When this is on, you may set the camera baud in the OSD rather
than using the DIP switches.
This is a great time saver,
as you no
longer have to open the camera to set its address.
When this is off, you must set the camera’s address with the DIP
switches. See the appendices for details on setting the DIP switches
manually.
After you enable or disable the soft baud, the camera automatically
reboots.
Broadcast Addr
When the camera is set to broadcast its address, a control device
(usually a joystick controller) with an address of 0 can control all
PTZs connected to it.
