36
37
5f.
Immediately after a flash is delivered,
move the HAND PIECE to a new
treatment location while keeping the
FLASH BUTTON pressed down. After
5 seconds the BULB LIFE LIGHT will
turn on again and the device will beep.
If the treatment cap is in full contact
with the skin and the FLASH BUTTON
is pressed down, another flash will
be delivered.
After a flash is delivered, lift the hand
piece to the next area in a grid-format.
NOTE: If the button is kept depressed, the
hand piece can be slid between spots.
About 3 seconds later (assuming Contact
Sensors are in contact with skin), the
device will once again emit a “BEEP” to
confirm that it is ready to flash.
The device will operate if FLASH BUTTON
is pressed.
5g.
Try to treat in an organized, grid-
like pattern to ensure you cover all
hairs in the intended treatment area.
WARNING: DO NOT
flash the LumaRx
Full-Body Hair Removal System on
the same treatment spot multiple
times during the same session, as
this could cause skin swelling, tempo-
rary blisters, or could change the color
of your skin.
Repeat step 5 until the desired treatment
area is fully covered. Depending on the
area, the treatment time will vary.
NOTE: For faster coverage you may hold
down the FLASH BUTTON while you lift
the HAND PIECE and place it back in con-
tact with a new area to be treated. This
will cause the unit to deliver a flash to the
skin as soon as full contact between the
skin and the treatment cap is established.
Recommended Treatment Schedule
Your initial regimen should be spread out
over 1 month to ensure that you target
the most number of active hairs (including
those that recently cycled from the
resting phase).
We recommend that you
use the
LumaRx Full-Body Hair Removal
System once a week, every other
week, over a month (for a total of 3
treatments)
on each area.
If you have redness, blistering or other
skin irritation in the treatment area, DO
NOT perform the treatment. Wait until the
skin returns to normal before using the
LumaRx Full-Body Hair Removal System
again. If the irritation does not go away
with 3 days, contact Customer Service on
page 51.
OPERATING INSTRUCTIONS