Operating Manual V8.2/03.2017
Non Invasive Road Sensor
G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany
17
Fig. 2: Mast Bracket
Fig. 3: Sensor
Attachment
8
Installation
The sensor bracket is designed for installation on a mast with a diameter of 60
– 76mm.
The following tools are required for the installation:
2 open-end or box wrenches, SW17
8.1
Fastening
Attach the bracket to the mast at the prescribed height using the bolts, nuts and washers
provided. Hold the nut firmly with one wrench and tighten the bolts evenly and securely with
the second wrench.
Note:
Select the correct bolts in accordance with the diameter of the mast:
60
– 69 mm mast diameter: 100 mm long bolts
70
– 76 mm mast diameter: 120 mm long bolts
Attach the sensor to the bracket from above and fasten using the bolts and washers
provided. Tighten the bolts but make sure that the sensor can still be moved.
Washer
Bolt
Nut
Bolt
Washer
