Lufft CHM 15k, Руководство пользователя

Страница: 28 / 73

Operating Manual CHM 15k R13 / 07-2019
Communication via RS485 & Ethernet 28
Parameter Short
cmd
RS485
Default
value Range / short description
NetMask NMA 0.0.0.0 Set / request the static Netmask address
NtpMode NTM 1 0; 1 switch ntpd on / off
NtpServer NTS 0.0.0.0 Set / request the NTP time server address
PeltierMode* PTM 1 0; 1
RangeEnd RAE 15345 Last range value in a NetCDF file
RangeHRDim RHD 32 Number of data points in the height-resolved
distance vector
RangeResolution RAR 3 Number of 5 m range intervals averaged for
the NetCDF data vector
RangeStart RAS 15 First range value in a NetCDF file
Reset RST 0 0; 1 restart of the CHM (see 8.2.4)
ResetPassword* RSP 0 0; 1; reset the super user password
ResetSettings RSG 0 0; 1 reset to the factory settings, (see 8.2.4);
web interface: set to factory setting
RestartNetwork RSN 0 0; 1 writes the new settings in the
configuration file and restarts the network
RS485Number RNO 16 0
– 99 (used with RS485)
ServiceMode RS485 SMO 0 0; 1 switch to the Service mode to change
“critical” values
ShutDown SHT 0; 1 shuts down the CHM system
StandBy STB 0 0; 1; Standby mode with standby telegram to
reduce power consumption
SystemStatusMode SSM 0 0; 1; the escalated status code will be used in
the telegram if set to 1
TimeOutRs485(s)* TOR 30 5
– 3600
TimeZoneoffsetHours TZH 0 -12 .... 12 hours, e.g. CET is +1, used to
control the window ventilation
TransferMode TMO 0 0
– 9, see section 8.3
TransferModeAfterError* TME 0 0
– 9
UAPD* 1 Device-dependent in mV (e.g. 172000)
Unit(m/ft) UNT m m, ft
UseAltitude UAL 0 0; 1
WMOStationCode WSC Set / query the WMO station code
Zenith ZET 0 0 - 90 degrees (x 100) Web
(e.g. 10.25
RS485
and 1025
Web
)
0° is vertical