Model 2363
Technical Manual
Section 7
Ludlum Measurements, Inc.
Page 7-5
January 2015
calibration date ahead of the current date. The length of the command is 12
characters, including a [CR] and [LF]. The format is:
SC11201997[CR][LF]
Sdmmddyyyyz
This command sets the current date. The date is entered in “Month Day Year”
format. The PCF8593 clock/calendar chip uses a counter from 0 to 3 to
represent the year. The variable “z” must correspond to the following table.
The length of the command is 13 characters including a [CR] and [LF].
Year ending in
Year Code
96
0
97
1
98
2
99
3
00
0
01
1
02
2
03
3
04
0
05
1
06
2
07
3
08
0
09
1
10
2
For example, the command to set the date to November 20, 1996 is:
SD112019960[CR][LF]
SExyyyy
This command sets the neutron or gamma
efficiencycal constant
. If x = 1,
the neutron
efficiency cal constant
is set. If x = 2, then the gamma
efficiencycal constant
is set. The length of the command is nine characters,
including a [CR] and [LF].
Shxyyyyyyyyyyyyyyy
