Ludlum Measurements 3100, Руководство пользователя

Страница: 8 / 57

vi
SAFETY SUMMARY
This manual describes operations and organizational-level maintenance of the Model 3100, including the
potential associated risks. The user must become completely familiar with the information in this manual
and adhere to the procedures, recommendations, warnings and cautions for the safe use, maintenance
and storage of this instrument. The following are general safety precautions and instructions that users
must understand and apply during use of the Model 3100 to ensure personnel and equipment safety.
Portions of this may be repeated elsewhere in this publication for emphasis.
DO NOT SERVICE OR ADJUST ALONE!
Under no circumstance should any person reach into or enter the enclosure for the purpose of servicing
or adjusting the equipment, except in the presence of someone who is capable of rendering aid.
RESUSCITATION
Personnel working with or near high voltages should be familiar with modern methods if resuscitation.
Such information may be obtained from the Bureau of Medicine and Surgery.
WARNING, CAUTION AND NOTE STATEMENTS
WARNING, CAUTION and NOTE statements have been strategically placed throughout this text prior to
operating or maintenance procedures, practices, or conditions considered essential to the protection of
personnel (WARNING) or equipment and property (CAUTION). A WARNING or CAUTION will appear
each time a related step is repeated. Prior to operating or conducting maintenance on the Model 3100
the WARNINGS or CAUTIONS included in the text for that task will be reviewed and understood.
WARNING
Users shall conduct all radiation surveys in accordance
with Federal and organizational guidelines to prevent
hazardous exposure to external radiation sources and/or
contamination.
WARNING
High voltage (115 VAC power and 75 VDC chamber
bias) is present in this equipment, which can cause
injury to operating or maintenance personnel. Observe
the following safety precautions during troubleshooting
or maintenance.

Never disconnect or unsolder cables or
components while power is turned on.

Always shut off power when connecting test
instruments to the equipment.

Use one hand only when necessary to move
oscilloscope or multimeter probe when power is
turned on.