23
1
2
1
2
1
2
1
Changing the presser foot
1. Remove the presser foot
Raise the presser foot lifter. Press the back lever to release the
presser foot.
- Lever (1)
2. Attach the presser foot
Lower the presser foot lifter until the cut-out meets the pin.
The presser foot will attach to the presser foot holder automatically
- Cut-out (1)
- Pin (2)
3. Remove and insert the presser foot holder
Raise the presser foot lifter. Align the presser foot holder with the
lower left side of the presser bar. Hold the presser foot holder, then
tighten the screw using the enclosed L-screwdriver
- Presser foot bar (1)
- Presser foot holder (2)
4. Insert the edge/quilting guide
Insert the edge/quilting guide in the slot as illustrated. Adjust the
needed width according to your sewing applications.
- Slot (1)
- Edge/quilting guide (2)
Attention:
Turn the power switch to off (“O”) when carrying out and of the
operations below!
MACHINE SETTINGS
1
2
3
4
