60
1
1
05
00
3.5
UTILITY STITCHES
Free motion darning, embroidery and monogramming
Preparation for embroidering and monogramming
* Embroidery hoop is not included with the machine
Move the drop feed lever to lower the feed dogs
- Lowered position (1)
Remove the presser foot and the presser foot holder.
Draw the desired lettering or design on the surface of the fabric.
Stretch the fabric between the embroidery hoop as firmly as possible.
Place the fabric under the needle. Make sure the presser foot bar is
down to its lowest position.
Turn the handwheel towards you to bring up the bobbin thread
through the fabric. Sew a few securing stitches at the starting point.
Hold the hoop with thumb and forefinger of both hands while
pressing the material with the middle and third finger and supporting
the outside of the hoop with your small finger.
Attention:
Keep fingers away from moving parts, especially needles.
Note:
When you finish the work, move the drop feed lever to raise the
feed dogs.
- Raised position (1)
