16
1
Inserting the bobbin
When inserting or removing the bobbin, the needle and the presser
foot must be fully raised.
Open the bobbin cover by pushing the release button to the right.
- Release button (1)
Insert the bobbin in the bobbin case with the thread running in a
counter-clockwise direction (arrow).
Pull the thread through the slit (A).
With a finger hold gently on top of the bobbin, please follow the arrow
markings and draw the thread into the bobbin thread guide from (A)
to (B).
Follow the arrow markings and draw the thread into the bobbin
thread guide from (B) to (C).
To cut off excessive thread, pull it to the cutter at point (C)
Close the bobbin cover.
Attention:
Turn the power switch to off (“O”).
MACHINE SETTINGS
